Back to corpus
research noteexperiment writeup candidatescore 32

Session State

Progress: - K11 is the active compute path; Jetson-era internals are legacy. - ZHAOCAILIN 11.3 inch display is modeled as a top cradle with a cable pass-through, not a structural top cutout. - Arducam IMX586 USB camera is modeled in the right-front bay with a new printable mount. - Approval renders are in `hardware/cad/renders/approval/`. - Validation STLs are in `hardware/cad/exports/approval-v2/`. - Symmetric two-Arducam variant is available with `ARDUCAM_LAYOUT="dual"`, mockups in `hardware/cad/renders/approval/

Open full HTMLDownload HTMLCorpus JSONPaper schema

Full HTML reader

Read the full artifact

Open in new tab

Extracted abstract or opening context

Progress: - K11 is the active compute path; Jetson-era internals are legacy. - ZHAOCAILIN 11.3 inch display is modeled as a top cradle with a cable pass-through, not a structural top cutout. - Arducam IMX586 USB camera is modeled in the right-front bay with a new printable mount. - Approval renders are in `hardware/cad/renders/approval/`. - Validation STLs are in `hardware/cad/exports/approval-v2/`. - Symmetric two-Arducam variant is available with `ARDUCAM_LAYOUT="dual"`, mockups in `hardware/cad/renders/approval/approval_symmetric_*`, and STLs in `hardware/cad/exports/approval-symmetric/`. - Femto Mega datasheet fit audit completed in `hardware/cad/FEMTO_MEGA_FIT_AUDIT.md`; rear feedthrough is now 87 x 38mm and Femto mount is a bottom/side cradle. - Current print manifest is `hardware/cad/PRINT_APPROVAL_QUEUE_CURRENT.md`; older queue docs are marked stale and existing prearranged 3MFs should be rebuilt before final printing. - Legacy/stale labels were added to old Jetson/SVPro-era plans and slicing docs so the active truth files are `LUME_CURRENT_BUILD_SPEC.md`, `LUME_SYMMETRIC_CAMERA_VARIANT.md`, `FEMTO_MEGA_FIT_AUDIT.md`, and `PRINT_APPROVAL_QUEUE_CURRENT.md`. - Wiring/service access updated: pod has a 150 x 64mm rear K11 service window, matching VESA plate window, and a 44 x 18mm right-side service slot for USB/Bluetooth/Sony adapter extension access. Plan doc: `hardware/cad/LUME_WIRING_SERVICE_PLAN.md`. - K11 CAD dimensions updated to official GMKtec 132 x 125 x 58mm. OrcaSlicer 3MF approval plates generated at `hardware/cad/print/3mf-current/approval-v2/` and `hardware/cad/print/3mf-current/approval-symmetric/`. Blender approval renders generated at `hardware/cad/renders/blender-approval-single/` and `hardware/cad/renders/blender-approval-symmetric/`. - Long unattended render completed 2026-04-30 around 13:25: 4K/128-sample Blender approvals are in `hardware/cad/renders/blender-approval-single-4k/` and `hardware/cad/renders/blender-approval-symmetric-4k/`. Combined visual sheet: `hardware/cad/renders/blender-approval-4k-contact-sheet.png`. The temporary `caffeinate` guard was stopped after completion. - Symmetric dual-Arducam internals plate was rebuilt after Orca found the old `02_internals_dual_arducam.3mf` had a broken layout with objects off the bed. The old file is now in `hardware/cad/print/3mf-current/approval-symmetric/legacy-broken-layout/02_internals_dual_arducam_DO_NOT_PRINT_broken-layout.3mf`; use `hardware/cad/print/3mf-current/approval-symmetric/02_internals_dual_arducam_ASA_READY.3mf`. - User selected the symmetric dual-Arducam variant as the active approval path. - `02_internals_dual_arducam_ASA_READY.3mf` has ASA settings, 0.20mm layers, 4 walls, 5 top/bottom layers, 25% gyroid infill, support enabled, 3mm brim, and conservati

Promotion decision

What has to happen next

Attach run IDs, datasets, metrics, and reproduction commands.

Why this is not always a full paper yet

Corpus pages are public-safe readers for discovered workspace artifacts. They are not automatically final papers. A corpus item becomes a polished paper only after the editable source, evidence checkpoints, references, figures, render path, and release status are attached through the paper schema.