LUME Current Build Spec - K11 + Top Display + Arducam

This is the current approval target for the LUME physical build. It replaces the earlier Jetson/SVPRO-oriented assumptions from the old print queue. - Compute is the GMKtec K11 in the rear T-form pod. - The ZHAOCAILIN 11.3 inch 1920 x 440 mini monitor sits on top of the bar in a low cradle. It is not cut through the bar body. - The Arducam IMX586 USB 3.0 camera sits in the right-front auxiliary camera bay with its own printed mount and Type-C cable relief. - The Orbbec Femto Mega remains centered on the front face. - The K11 ports live in the rear pod. The bar rear now has a pod umbilical/feedthrough interface instead of visible Jetson-style ports. - `renders/approval/approval_bom_contact_sheet.png` - all current views in one image. - `renders/approval/femto_datasheet_fit_contact_sheet.png` - Femto Mega datasheet drawings plus current CAD fit check. - `renders/approval/approval_bom_hero.png` - 3/4 form-factor view. - `renders/approval/approval_bom_front.png` - front view showing Femto and Arducam placement. - `renders/approval/approval_bom_top.png` - top view showing the monitor and rear pod. - `renders/approval/approval_bom_ghost.png` - ghosted view showing mounts, cable path, K11 sled, and Arducam bracket. | Component | CAD assumption | Notes | |---|---:|---| | ZHAOCAILIN 11.3 inch monitor | 305 x 80 mm face footprint, 60 mm vendor-listed depth, 12 mm current render thickness | Public listing dimensions are inconsistent about case depth/orientation. Do not cut a structural pocket until top orientation is approved. | | Arducam IMX586 USB camera | 34 x 34 x 16.2 mm body, 28 x 28 mm mount pitch | Based on Arducam B0478 datasheet. Mount has a 20 mm lens aperture and Type-C cable notch. | | GMKtec K11 | 132 x 125 x 58 mm | Official GMKtec dimensions. Lives in rear pod. Sled includes intake slots and 12 mm standoff clearance for bottom fan airflow. | | Orbbec Femto Mega | 115 x 40 x 145 mm total body model | Centered front sensor module. Existing STL proxy is still used for visual fit. | These are for validation only. The existing prearranged 3MF files are not updated yet.